High physical relieve up to 80% less pushing force required!
An enormously important part of paver installation is the filling of the joints with sand. Only when the joints are filled completely and durable with sand the pavement is stable for a long time. Functional loads are then distributed to a bigger surface, then the pavement is durable and stable for a long time.

• The joints are filled by sweeping in dry sand or by flashing in wet sand with water. This job is done thoroughly and quickly with the paver jointing device Easy-Fill from Probst. With the wide working width of 1,17 m (46”) the EF-H reaches a big area very efficiently. The 2 rotating brushes are overlapping and they are driven by a powerful 5,5 HorsePower benzene engine. The rotating brushes are creating a forward drive at the same time. Therefore the need for pushing action is reduced by about 80 %. Usually one single pass is sufficient to fill the joints completely.
• Perfect penetration of the joints Resanding at a later time is not necessary anymore. Output figures: 50 sqm in less than 15 minutes ! The Easy-Fill fulfils all requirements with respect to economical and reliable measure of working, easy operation and low wear durability.
• When flushing the sand with water into the joints it is very important to be able to dose the water more sensibly. Therefore the EF-H from Probst is equipped as standard with a water tap. With this water tap the amount of water can be controlled easily.
• Another advantage of the water tap: The water flow can be completely stopped at any time in order to not waste water when then process has to be stopped for any reason. The operator does not have to walk to the water source to stop the water flow. As a matter of fact too much water, which penetrates the ground, can make the pavement instable for a period of time.
• With the innovative Easy-Fill the sand sweeping and sand flushing can be done efficiently, simply and effortlessly. The bristles have a wear reserve of 50 mm. This means a long lifetime for the brushes and lowest maintenance.
• The Easy-Fill is a very high quality mechanical engineered product, designed for reliable function, durability and efficient workforce-saving handling. The forwarddrive minimizes the force to push the device by up to 80 %. The adjustable handle adapts to operators with different body height. The hood is rounded at the front in order to get easily access also into all corners.
• It can not be avoided that sometimes a paver or any other kind of debris will get in between the rotation brush and blocks the movement. In order to avoid any damage on both brushes and drives the EF-H disposes of an overload protection.
• In no time the EF-H brushes can be exchanged for steel brushes. With this configuration heavy dirt or moss can be cleaned off older pavement surfaces. Additional information and leaflets are available from your construction equipment dealer or directly from Probst.