PRODUCTS
 HOLLOW CORE PRECAST » Concrete Saw
 

The concrete saws are suited for cutting Precast concrete elements on the production beds.

Due to their robust construction, clear design and exact guides; maintenance and repair are reduced to their minimum. The saws are designed for diamond tipped saw blades, having a diameter from 600 to 1100 mm.

All types have mechanical stops for the stroke of the saw blade to avoid any damages to the production bed or rails. They have a single point suspension, so that they are lifted by the over-head crane without needing any additional lifting hoists.

Optionally the saws have two drums to keep the electric feed cable and the water hose automatically stressed and wound up.

We provide four types of saws according to our clients specifications.

1. The standard saw
The machine is positioned by the operator at the required cutting position. The Standard Type is equipped with manual operated hydraulic valves - thus the cut is performed by the operator of the machine. All speeds can be separately controlled with flow control valves.

2. Semi automatic Saw
The machine is positioned by the operator at the required cutting position. The Semi-Automatic Type is equipped with electro operated hydraulic valves, limit switches and a PLC controller - thus after starting the automatic program a complete cut is carried out automatically and the saw blade returns to its starting position. A "safety package" controls an automatic supply of coolant and the feed of the saw blade to avoid its overheating and bogging down

 
 

3. Universal Cutting Saw
The Universal Cutting Saw runs on the same rails [part of the casting bed] as those used for the molding machine unless the design is changed to suit other arrangements

The Universal Cutting Saw is composed of:

  • A gantry-type traveling main frame straddling the casting bed, with two driven wheels and two trailing wheels, with the operator’s stand mounted on one end, and the reels for both power cable and water hose on the other end, respectively;
  • A machine support beam [traverse], mounted into the main frame perpendicular to the direction of travel, and supported by four rack-and-pinion drives for moving up and down;
  • For angular cutting a rotating machine support console is provided, with indexing drive from plus 90° to minus 90°, and support bracket for the V-belt driven saw blade; the console is riding on the support beam by means of a reversible travel mechanism for traversing;

The saw motor with drive pulley, mounted onto the support console.

4. Fully Automatic Saw
Concrete cutting saw for the automatic cutting of pre stressed concrete units on the stressing bed: variable saw blade diameter of up to 1200mm, max cutting depth of 46 cm, equipped with among others:

  • modern central hydraulics integrating a valve block system
  • Reliable machinery including infinitely variable drives requiring low maintenance automatic feed control for saw blade.
  • Angular cuts is done by the machine.
 
Copyright © Deewan Equipment Trading, Designed & Hosted by Cyborg IT